TDA 8362

GENERAL DESCRIPTION

The TDA8360, TDA8361 and TDA8362 are single-chip TV

processors which contain nearly all small signal functions that are

required for a colour television receiver. For a complete receiver the

following circuits need to be added: a base-band delay line (TDA4661),

a tuner and output stages for audio, video and horizontal and vertical

deflection.

Because of the different functional contents of the ICs the set maker can

make the optimum choice depending on the requirements for the receiver.

The TDA8360 is intended for simple PAL receivers (all PAL standards,

including PAL-N and PAL-M are possible).

The TDA8361 contains a PAL/NTSC decoder and has an A/V switch.

For real multistandard applications the TDA8362 is available. In addition

to the extra functions which are available in the TDA8361, the

TDA8362 can handle signals with positive modulation and it supplies

the signals which are required for the SECAM decoder TDA8395.

Available in TDA8360, TDA8361

and TDA8362

•Vision IF amplifier with high sensitivity and good differential gain and phase

•Multistandard FM sound demodulator (4.5 MHz to 6.5 MHz)

•Integrated chrominance trap and bandpass filters (automatically calibrated)

•Integrated luminance delay line

•RGB control circuit with linear RGB inputs and fast blanking

•Horizontal synchronization with two control loops and alignment-free horizontal oscillator without

external components

•Vertical count-down circuit (50/60 Hz) and vertical preamplifier

•Low dissipation (700 mW)

•Small amount of peripheral components compared with competition ICs

•Only one adjustment (vision IF demodulator)

•The supply voltage for the ICs is 8 V. They are mounted in a shrink DIL envelope with 52 pins and are pin compatible.